当前位置: 首页 > 本地行业News

伊犁(当地)软管泵-水渠机货源足质量好

     发布人:[伊犁]豫信致诚机械设备有限公司
  • 更新时间: 2025-03-17 11:41:00
  • 公司邮箱 2831509198@qq.com
  • 公司名字: [伊犁]豫信致诚机械设备有限公司
  • 公司地址: 伊犁中站李封南会253号
  • 杨经理
    0527-88266222
    扫一扫
    扫一扫,用手机访问更方便
    伊犁(当地)软管泵-水渠机货源足质量好,伊犁豫信致诚机械设备有限公司为您提供最新伊犁(当地)软管泵-水渠机货源足质量好产品案例,联系人:杨经理,电话:0527-88266222、0527-88266222,QQ:1779278777,发货地:中站李封南会253号。
            
    想要知道伊犁(当地)软管泵-水渠机货源足质量好产品如何?看视频就知道!看视频,选产品更明智!


    以下是:伊犁(当地)软管泵-水渠机货源足质量好的图文介绍



    首先我们先介绍一下软管泵,软管泵又称蠕动泵。为了消除泵体污染流体或流体污染泵体的危险性,整个泵的装置中只有软管与介质接触。在一般场合下,软管泵使用的都是天然橡胶的软管。内层和外层都是完整光滑的天然橡胶,其目的是很强防磨损。适用于腐蚀性不高但磨损性很大的如泥浆以及无机物等等介质。而且一般适用于脂肪、油类或油脂的介质,以及有机化学物质。内层是橡胶,而外层是天然橡胶或者是复合橡胶。

    First of all, lets introduce the hose pump, which is also called peristaltic pump. In order to eliminate the danger of the pump body contaminating the fluid or the fluid contaminating the pump body, only the hose in contact with the medium in the entire pump device. In general, hose pumps use natural rubber hoses. The inner and outer layers are completely smooth natural rubber, the purpose of which is to prevent abrasion. It is suitable for mediums that are not corrosive but very abrasive, such as mud and inorganic substances. And generally suitable for fats, oils or oils, and organic chemicals. The inner layer is rubber, while the outer layer is natural rubber or composite rubber.

     




    软管泵主要有泵壳、转子体、减速机、机座和软管等5大部分组成。泵的耐久性主要决定于管子的弹性和耐腐蚀性,其流量与电动机的转速和管子内径大小有关。

    The hose pump is mainly composed of 5 parts: pump casing, rotor body, reducer, base and hose. The durability of the pump is mainly determined by the elasticity and corrosion resistance of the pipe, and its flow rate is related to the speed of the motor and the inner diameter of the pipe.




    豫信致诚机械设备有限公司位于中站李封南会253号,占地2万平方米,注册资金500万,现有员工100多人,拥有先进工艺的标准化 伊犁滑模机生产线,生产工艺先进而成熟。我们热切地期盼与四方宾客携手共进!



    软管材质:天然橡胶,采取单管与双管设计; 软管通径约最小规格15mm; 规格100mm;流量最小规格0.15立方/小时; 规格80立方/小时;出口压力 1.6MPA ; 性能特性高含固量的流体、半流体;腐蚀、非腐蚀;  颗粒 软管通径的1/4,无尖锐棱角;低压短距离吸送,无阀工作,无回流,泵送料流稳定,故障率低。 进排口可自由转换,当有异物堵塞时,倒转便可排出堵塞物;真空度高,自吸能力强 ;维修简单快捷,易损件少(仅挤压软管) ;适用温度小于90℃。           




    工业软管泵不锈钢齿轮泵,可输送非润滑油饮料低腐蚀性液体,配铜齿轮可输送汽油苯等低内点液体。由于齿轮泵自吸能力差,一般是由于齿轮泵泵腔间隙较大所致。同时也是如果齿轮泵输出端没有“止回阀”,则必须是下一级齿轮泵的止回阀或控制阀。移动固定后,周围工作人员可恢复手术。

    Industrial hose pump stainless steel gear pump, can transport non-lubricant beverages with low corrosive liquids, with copper gears can transport gasoline, benzene and other low internal point liquids. Due to the poor self-priming ability of the gear pump, it is generally caused by the large gap between the pump cavity of the gear pump. At the same time, if there is no "check valve" at the output of the gear pump, it must be a check valve or control valve of the next gear pump. After moving and fixing, the surrounding staff can resume surgery.


    也许您对以下产品新闻也感兴趣

    技术支持:k797.com

    首页

    交谈

    商家电话